Manufacture price Laser marking machine for metal on hot sale
● Specific parameters
Working Area | 100*100mm |
Optional working area | can customized |
Cooling Type | Air cooling |
Laser power | RAYCUS:30W,good brand in china |
Control system | China PC control system |
Working table | Aluminum alloy table,red point |
Galvanometer and field lens | High speed galvanometer,field lens |
Software | JCZ EZCAD software |
laser wavelength | 1064nm |
Q-frequency | 20KHz~80KHz |
Divergence | 0.3mard |
Minimum Line Width | 0.01mm |
Minimum Character | 0.15mm |
Marking Depth | 0 ~0.5mm |
Engraving Line Speed | ≤7000mm/s |
Repeatability Accuracy | ±0.001mm |
Beam Quality | M2:1.2~1.8 |
Graphic Format Supported | bmp,jpg,gif,tga,png,tif,ai,dxf,dst,plt,etc. |
Working Voltage | 220V±10%/50Hz/4A |
Unit Power | <500w |
Use of the Environment | Clean and Dust Free or Dust less |
Working Condition:Humidity | 5%-75%,Free of Condensed Water |
Laser Module Life | >100000 hours |
● Parts of the fiber laser marking machine
The above contains Beautiful appearance of Laser marking machine for metal.high tech viberating mirror and filed lens. original version software. up-down platform and so on.
● Advantages
1. with high quality and high tech means long lifetime and high accuracy.
2. Low price but not present little function.it can marking on metal and non-metal.
3. Due to the material and volume,it can working in many area.
4. Advanced control system help you operate it easier and without much problem.
● Samples
● Packing and shipping
● Our company and factory
● FAQ
Q: How much time could I get the machine?
If you plan the order, we could product for you, generally, 20 days is enough. then is sea sail time. different areas are different, you could consult us.
Q: How to get a good machine
1)Machine quality. If you plan to choose a so cheap machine, maybe the quality is bad.And you have to order another machine after you use it for a period.This situation will have a bad effect on your producing.So the quality of the machine is most important factors to choose a laser machine.
2)After sales service. if you buy a machine without after sales service, it's terrible.a good service after you get the machine can help you save a lot of time.besides, it can solve many problems immediately you met.
3)The third is technical support.Because of time difference, their is a big problem to communicate with the seller, so you should sure that the seller could or couldn't help you timely.
Contact ways:
Skype: Unistarcnc002
Email: jenny@unistarcnc.com
Hot Tags: laser marking machine for metal, China, manufacturers, suppliers, factory, price, for sale